Re: Farmall 100 12 volt question

Posted by Hobo,NC on July 30, 2007 at 06:26:10 from (71.29.34.207):

In Reply to: Re: Farmall 100 12 volt question posted by Hobo,NC on July 27, 2007 at 17:49:28:

7127 is the generic # for a GM 10SI alt. 1975 to mid 80's GM pick up with 350" engine. As mentioned a pulley with a double grove should get ya in the ball park. I remember Chevy trucks with in line 6 cylinders using this type of pulley, it also ran the power steering belt that's why it had the extra grove. You may have the parts man look it up for a 250-6 are a 292- 6 with P/S, and may have to get into a 30-40-50-60 series truck to find it. I would think any starter/alt shop would Carrie this type of pulley. I figger a standard single groove pulley would work BUT it would make it EZ'er if the alt could B set back like the one in my pix. The sharpest guy I know about this alt stuff is Bob, I will shoot'em a email and see what he has to say.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]