|
Farmall & IHC Tractors Discussion Board |
Re: One point hitch adapter
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Hugh MacKay on July 25, 2007 at 18:12:12 from (209.226.247.167):
In Reply to: Re: One point hitch adapter posted by brmtdg on July 25, 2007 at 17:42:25:
I saw one guy fabricated an adaptor using a 3 point hitch cross bar, fast hitch socket with an upright from that to hook top link. The moldboard plow is one item I can see creating a few problems, not just sure how the front coulter will fit under all that hitch. I know I have a fast hitch socket here from a 560, thought about building one of those adaptors, however I don't have a 3 point tractor. As it stands right now, no one that I know within 10 miles can use or want to borrow my implements. I had a neighbor, full time trucker, and weekend farmer with a 444 and 3 point plow, disk, cultivator, logging winch, etc. He was very generous about lending his implements, kind of tell the wife what you took. Every weekend when he decided to do some farming, he had to chase around the community finding his implements. Apparently he couldn't get his wife interested enough to write down who took what. For that reason, I've always decided it's best to have implements no one else can hook to. Did you ever notice how many guys have small 3 point tractors and not an implement to their name. Really all you have to do is build the adaptor, and use padlocks in place of hitch pins.
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
