|
Farmall & IHC Tractors Discussion Board |
856D oil canister problem
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by D Glynn on July 23, 2007 at 18:34:55 from (205.188.117.137):
Was changing the oil filters on an IH 856D. After removing the canister, I pulled the oil filter out and poured the oil into a bucket. Not only poured oil out but a few parts, i.e. a spring base, a spring, and a retaining ring. Seems the retaining ring that holds the spring and spring base down in the center of the oil filter will no longer seat in the groove. Not sure if replacing the ring will work or the groove is worn to the point that it won't hold. Has anyone had this problem before and if so how did you fix it? Also, wondering if that spring base and spring could be left out. Seems that the base that the filter sits on is also spring loaded and serves to push the filter up against the top of the canister so the oil goes through the filter. Any help/comments/experiences would be appreciated. Thanks!
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Bad Vibes - by Curtis Von Fange. One of the strangest ways to communicate with our tractor is to ask it how it feels. "Ask it how it feels," you say? Yup, ask it how it feels. Now, as with the other articles in this series one has to be able to hear what 'ole blue' is trying to say in response. The nice thing about our old iron friends is that they are usually quite consistent in their response, rather unlike some people I know who might change what they say due to the weather or other mitigating circumstances. But since t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
