Re: h lifters

Posted by Janicholson on July 23, 2007 at 06:07:58 from (71.87.39.51):

In Reply to: h lifters posted by akb on July 22, 2007 at 23:03:33:

Lifter contact surfaces As stated below in many cases have a very shallow crown on them. This is almost unmeasurable, and might be best seen in a piece of glass. they would not rock more than a tiny bit when checked. If you can see aby roundness, it is toast. if there is cupping it is toast. In both cases, the cam is also toast (it might be regrindable, but no way is it ok to put new lifters on a cam that has had a bad lifter run on it. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]