Re: 585 state owend tracter arm yoke to long

Posted by Mike Van on July 15, 2007 at 03:23:24 from (24.151.104.209):

In Reply to: 585 state owend tracter arm yoke to long posted by gtmerkley on July 14, 2007 at 19:48:04:

Not sure if you have the same set-up as a 574, but years ago on mine the 3 pt. started lifting less & less. The problem was inside the main case, there's a threaded clevis attached to the lift linkage, the lock nut on mine must have not been tight enough & it was slowly backing itself out. I spent hours taking the thing apart, fenders, tank, lines, etc. the top cover weighs a lot. Parts & labor on this job - 0.00. Measure your lift arms, see what they are. There are places that sell used parts, about half the price of new.

Replies:

• Re: 585 state owend tracter arm yoke to long georgeky 12:28:38 07/15/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]