Re: Cub 154 ignition (now wiring) switch question

Posted by Janicholson on July 14, 2007 at 10:50:09 from (199.17.6.122):

In Reply to: Re: Cub 154 ignition (now wiring) switch question posted by 888 on July 13, 2007 at 11:27:25:

Make sure there is power (test light) comming from the ST terminal (with no ST marked on it) when the key is in this position.

The neutral safety switch is normally closed and in series with the starter solenoid to the start terminal mentioned above. If the interlock safety sw is ruined, the two wires going to it can be wired together (realize it will start with the PTO running, as all tractors before our litigeous society became aware of the nature of idiot operators) I do nt have this tractor, nor have I been around one or looked at a book, My diagnosis is purely experience on mobile technology from 1955 till now, (born in '49) JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]