Re: So I have this idea........

Posted by Hugh MacKay on July 12, 2007 at 02:05:00 from (216.208.58.166):

In Reply to: So I have this idea........ posted by Patrick Martin on July 11, 2007 at 19:43:12:

Patrick: Why not put a neat remote hydraulic control valve on the tractors current hydrauilc system.

To start with, power steering pumps for the most part are designed for close to 1 to 1 ratio with crankshaft of engines that turn 20% faster than your 100. Your going to install this on a pto or belt pulley shaft having less than 1/2 the speed, and in the case of pto probably 1/4 speed the steering pump was designed for. Why you could find a hand pump off an old porta power, would probably be just as fast.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]