Re: M Gear oil and such

Posted by TDM on July 06, 2007 at 05:23:11 from (205.188.116.73):

In Reply to: M Gear oil and such posted by Carden on July 05, 2007 at 19:50:27:

When you drain the rear, you can't get 100% of the oil out. Those axel housings hold some oil, thats why you're getting gravy leaking out. You have to pull the wheel to replace the outer seal and you can get a good look at the outer bearing after the seal is pulled. There is no inner seal. If you need to put bearings in axel housing, you can work through pto hole to take bull gear off, then pull axel housing off rear to get to inner bearing.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]