Re: what size baler should i get for the M

Posted by georgeky on July 01, 2007 at 09:39:56 from (205.188.116.73):

In Reply to: what size baler should i get for the M posted by jonnny2006 on June 30, 2007 at 21:09:00:

Jonnny, I have a 276 NH and a 430 All Twine IH. They are both very good balers. Parts are available for both. The IH 430 will bale more hay at the end of the day. I have never seen one that will bale with it. That being said, unless you just have to have an IH baler, I would recommend that you look for a NH, as parts are a lot cheaper for them and lots more folks know how to work on them. I can't speak to older IH balers never used one, but the 430 or 47 with all twine knotters will eat hay. Both my 276 or 430 rarely miss a bale. There will come a time in the not so far future that the IH parts will likely be retired. You have to consider the future of parts and NH will more likely have parts longer than IH will. Good luck.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]