Re: Super C Hydraulics not working - Part II

Posted by Hugh MacKay on June 29, 2007 at 18:31:18 from (209.226.106.73):

In Reply to: Super C Hydraulics not working - Part II posted by TreeFarmer1414 on June 29, 2007 at 16:56:25:

Tree Farmer: I expect you have something jambing that control linkage up in and behind the rockshafts. You'll probably have to remove the rockshafts. You might be able to see and fix with fuel tank off. Ocasionally I have had small objects like tree limbs or twigs fall in there and jamb the linkage.

Before I leave this, you did say lever won't go full travel, right or wrong? Over the years I have had the rockshafts catch on each other, however that doesn't stop lever travel, plus the tractor will labour when lever is beyond rockshaft travel.

I expect you either have some foreign material or something has come out of place or unhooked. Could be as simple as a pin part way out.

Replies:

• Re: Super C Hydraulics not working - Part II TreeFarmer1414 17:40:30 06/30/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]