Re: SH block cover

Posted by Bob M on June 26, 2007 at 08:57:31 from (151.190.254.108):

In Reply to: SH block cover posted by GordoSD on June 26, 2007 at 08:17:11:

Gordo - That's the tappet cover, or "pushrod chamber side plate" as it's referred to the parts book. And yes, there is indeed oil behind it!

I've not had the cover off on my SH. But I'd suspect that by removing the distributor cap you can probably "worry" the cover off without removing the distributor body. And even if you do have to remove the distributor, simply mark the rotor location on the side of the dist body before removing. Then as long as you do not move the crankshaft with the distributor off, simply align the rotor with the mark you made when you reinstall the distributor and you'll be all set.

Replies:

• Re: SH block cover RustyFarmall 11:34:02 06/26/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]