Re: Distributor problem on a C

Posted by Janicholson on June 23, 2007 at 10:23:20 from (66.173.50.95):

In Reply to: Distributor problem on a C posted by DaveK(IN) on June 23, 2007 at 07:21:30:

I will add to the other info that in my experience, the shaft and bushings may be causing as much of the difficulty as the lobes themselves. The drive housing has a plug for a grease fitting, but it is sometimes never greased. As the shaft wears the bushings go letting the cam wobble. Try moving the shaft sideways, up and down, in and out. if you can see it move at all, it will drastically change the point setting during operation. Bushings can be purchased from Motion industries that are twice as long as the old one they then run on a new part of the shaft, and are a good fix. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]