Re: Change belts on SM

Posted by Janicholson on February 17, 2007 at 16:55:28 from (66.173.50.176):

In Reply to: Change belts on SM posted by Soldner on February 17, 2007 at 16:39:28:

The belt comes off with some effort. The fromt of the fan pulley is adjustable. There are threads which allow the front half of the pulley to screw out (forward) to loosen the belt. There are square head setscrews with jamb nuts in the flange which must be removed first To assure a fair chance at success, soak the adjuster in penatrant for a few hours before wrenching. It is always easier to loosen threads with the head on the bolt. When it has the screws out, using a brass drift to tap the flange around is usually successful. Some heat is good if it is stubborn. Not too much as it can ruin the seals. Back and forth will loosen better than only one direction. Good luck, JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]