Re: 560 wont start

Posted by El Toro on February 15, 2007 at 06:08:28 from (152.163.100.199):

In Reply to: Re: 560 wont start posted by dennishinton on February 15, 2007 at 05:51:04:

You would not use the old ballast resistor. One thing that may change your mind about this 1C14SB coil from NAPA is the cost. The price is almost $40.00. Hal
PS: When a ballast resistor is defective the engine will usually start while cranking, then die
when the cranking is stopped. Run a separate wire from the battery to the coil and see if the engine will start. I would clean those points as I outlined in a previous posting. Even new points
need this. Good Luck.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]