Re: Super H Brakes Mr. Janicholson

Posted by Janicholson on February 03, 2007 at 20:14:12 from (66.216.226.55):

In Reply to: Super H Brakes Mr. Janicholson posted by Andrew Z on February 03, 2007 at 17:02:41:

The stone is probably best made from a rotary stone that is either the correct size to start with, or dressed to the exact size. A machine shop with grinding ability can do it. Google for arbor mounted abrasive stones. (150 grit for roughing, and 320 or so for smoothing) The radius of the groove should be exactly the same radius as 1/2 of the ball diameter, or .001-.002" larger. Using a good hand drill, and very equal pressure, nice strokes, counted and repeated on each groove equally, and uniform axial direction, resmoothing the grooves should be possible. Or have a machine shop do it. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]