Re: C 113 block bearing for governor

Posted by Janicholson on January 30, 2007 at 11:37:19 from (199.17.6.122):

In Reply to: C 113 block bearing for governor posted by thumbanger on January 30, 2007 at 11:18:09:

The part is seperate from Mains. It has its own part # order from CaseIH, This site, or other supplier. If it measures more than .001 difference at any two locations across its diameter measuring at least 6 diameters in various depths on the bearing, it needs to be replaced. If it has more than .0015 clearance between journal measurement, and the largst of the above measurements it needs to be replaced. The IH specs may be different, these are what I do. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]