Re: Hydraulic Pump Block-off Plate

Posted by Hugh MacKay on January 24, 2007 at 15:49:11 from (209.226.106.9):

In Reply to: Hydraulic Pump Block-off Plate posted by Patrick in Illinois on January 24, 2007 at 15:03:55:

Patrick: Just about any flat steel plate with a bit of gasket black will do the trick. Even plywood will work. I used to block off the hole where IPTO goes on Farmalls 300 and 560 and keep on using the tractor while PTO was being rebuilt. I just used 3/4" good one side plywood, designed to withstand weather. My plywood patch had oil 1/3 of the way up and never leaked. Your SC wont have oil against it, just splash from timing gears.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]