Re: Redoing steering on an H

Posted by glennster on January 24, 2007 at 15:09:37 from (68.78.75.201):

In Reply to: Redoing steering on an H posted by DH Illinois on January 24, 2007 at 14:35:55:

see if you can find a casting code on the bolster, you can determine the date of the bolster and see if its close to the year of the tractor. could be someone changed the front bolster. if it has a narrow front, you could snap them off in a ground hog hole or collapsed field tile. could also be the part you got was boxed wrong, wouldnt be the first time.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]