|
Farmall & IHC Tractors Discussion Board |
Re: Update on Old and the Ice Storm
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by GeneP on January 18, 2007 at 17:31:21 from (72.47.42.87):
In Reply to: Update on Old and the Ice Storm posted by David Kronwall on January 18, 2007 at 16:32:23:
Sounds like I am about the closest to him. I am 1 hour north. I have terrible ice on the ground but the warmer temps today melted it off the trees and lines. It got up to about 34 today and the sun was out so that helped. We kept our electricity thank goodness. Walking is the big problem. I drilled 14 deck screws into the cleats of some old hunting boots then clipped the heads off leaving about 3/8 inch stick out, they work great! I dont know what i could do for him. I have a little generator but it is only a 4000 watt Coleman and I dont think the 220 on that would be enough umph to help him with a pump. I am pretty new to the site so I dont really know him although I have seen a few of his posts.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Measuring with Calipers - by Staff. The legs of inside calipers are curved outward at the extremities to facilitate measuring small holes, while outside caliper legs have a large curve inward to increase their capacity for large work. Firm-joint calipers are adjusted approximately by the hands and then set to the feel of the work by tapping them on a metal surface. It is a common practice when opening calipers by this means to tap the top of the joint. It is better, if possible, to tap the inside of the legs, as repeated blo
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|