Re: IH 504 Block Heater

Posted by RustyFarmall on January 17, 2007 at 08:16:09 from (216.248.75.184):

In Reply to: IH 504 Block Heater posted by Brad Chase on January 17, 2007 at 07:58:38:

There are several different ways to install a block heater, depending on whether you want to heat the entire system or just the engine. Sounds like someone installed yours with the intention of heating the entire system, which is OK, but not as efficient. I think the proper way is to use the block drain plug for the inlet, and the outlet needs to be connected to a plug in the head, most likely choice would be where the temperature sending unit is attached.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]