Re: Super A hydraulics

Posted by scotty on January 17, 2007 at 04:48:20 from (199.231.49.128):

In Reply to: Super A hydraulics posted by ncpatriot65 on January 17, 2007 at 03:08:06:

The Super A had the Touch Control hydraulics, the biggest issue is to make sure the hydraulics can lift your implements! That would be a test for that unit.If they dont work you will need to rebuild it. If you rebuild the touch control unit your self, you can buy the rebuild kit from your local Case IH dealer for about $100, This kit includes all the gaskets and 0-rings you will need for the unit and the pump on the engine under your magneto. Its not a bad job, just keep everything clean and keep all your parts organized !

scotty

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]