USING 300 PARTS ON AN H

Posted by ETNFARMBOY on January 07, 2007 at 16:08:47 from (24.151.170.202):

Was wanting some advice. I have read on here about using some parts on an H from a 300. What is involved in using the live hydraulics from a 300 on an H other than the obvious, mainly the front gears and bolt pattern? Also, I believe I read a post about using the manifold and carb to get a little more power from the H if overhauled using crater pistons, etc. Any knowledge is greatly appreciated. Thanks

Replies:

• Re: USING 300 PARTS ON AN H Janicholson 18:18:42 01/07/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]