Re: Sickle bar mower pitman arm

Posted by Jim in NC on January 06, 2007 at 03:32:02 from (172.144.206.184):

In Reply to: Sickle bar mower pitman arm posted by Guyzoo on January 05, 2007 at 19:33:24:

Local blacksmiths have made them from hickory. They would use a dry block of wood from the tree trunk cut to proper lengh, split off a square piece and work it down. I have seen them make various hand tool handles the same way. They had different lengths of wooden blocks for different handles. I have seen pitmans at TSC.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]