Re: Super C update!!!!

Posted by El Toro on December 30, 2006 at 11:29:55 from (205.188.116.133):

In Reply to: Super C update!!!! posted by Patrick in Illinois on December 30, 2006 at 11:05:57:

Have that crankshaft measured at your local auto machine shop. They can determine after measuring it, whether you can still use .002" undersize bearings or the shaft needs to be ground .010"
undersize. That's a smart decision to have the block cooked and cleaned.

Those old sleeve seals get hardened like an old shoe left out in the weather and with a clean block and new seals should solve any coolant leakage from that area. Hal

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]