Re: Overhauling M engine

Posted by RustyFarmall on December 29, 2006 at 06:10:16 from (216.248.75.169):

In Reply to: Overhauling M engine posted by Carwilly on December 29, 2006 at 05:38:19:

Those old Farmall engines are about as straight forward as they come. All of the rules for rebuilding any engine will apply. The engine should be fully disassembled and all parts inspected and measured with a micrometer. These measurements should then be compared to the original factory specs. Anything that is out of tolerance should be either replaced or machined back into tolerances. Do not take any short cuts. Short cuts will be regretted later.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]