Re: Stuck Farmall M

Posted by No tools on December 13, 2006 at 18:28:24 from (71.79.44.154):

In Reply to: Stuck Farmall M posted by linemanfarmer on December 13, 2006 at 15:13:13:

Linemanfarmer

If that cylinder has not been full of water for a long period of time this may work for you.Remove valve cover back the valve adjuster off so that the valve are closed.
Take a old spark plug break the porcelain out of it. braze a fitting on it for air.put a 50/50 mix of anti freeze in cylinder put air on it leave it for ever amount of time you wish.Anti freeze well pentrate the corrosion the air will push it down through.water makes rust.(corrosion) water will dissolve it.If real bad it well not work.

Bill

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]