Re: Time mark Super C

Posted by CNKS on December 13, 2006 at 06:19:03 from (204.249.178.135):

In Reply to: Time mark Super C posted by Beninarkansas on December 13, 2006 at 06:05:45:

You didn't miss anything except the mark. That is a very narrow mark easily hidden by dirt, grease etc. Put # 1 on TDC and clean the surface. I promise you it's there. You can prop yourself up underneath and move the flywheel /ring gear with a screwdriver. My C does not have the DC or whatever on it that someone may have mentioned, only a mark. Doubt if the SC does either. If it is not there keep rotating the flywheel, clean it off as you go, it WILL be there.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]