Re: Clutch Pedal Sideware

Posted by SDE on December 12, 2006 at 19:21:01 from (69.179.17.103):

In Reply to: Clutch Pedal Sideware posted by TV Iron on December 12, 2006 at 17:17:14:

I just took a shaft out of my 400. It had .100 wear in one spot and about .09 in another. I welded it myself and took it to work and machined it down to size. It only took 15 minutes to machine. If a new shaft is $50 you may not what to bother repairing the old one, but ask at your local machine shop how much to machine it. The pedal has some wear, but very little compared to the shaft. The pedal would flop over and go along side the deck before the repair,now it only moves a little bit.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]