Re: saganaw 3 pointer

Posted by Hayfarmer on December 04, 2006 at 19:00:08 from (66.243.233.96):

In Reply to: saganaw 3 pointer posted by tom windsor on December 04, 2006 at 14:09:50:

I have a 3 point on my SMTA that looks like the Saginaw but isn't. Was on it when I got it. Has the same 2 cylinder option and removing a pin to remove down pressure. Nice thing about them is that with the pins and snap clips you can remove the arms easily if you are using some thing that they interfere with. Like my baler. And you can still use original drawbar. I have had problems with front of it being light but only when using a heavy 3 point disc. I have seldom used the down pressure. Only time I remember was using a subsoiler and it was not to push it into the ground but rather to keep it at a set depth. ONly other problem is that on some tools ytou can't get them down far enough before the arms hit the drawbar.

Replies:

• Re: saganaw 3 pointer Bruce Wa. 05:03:03 12/05/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]