Re: 340 industrial power steering problem

Posted by fredfromwyo on November 29, 2006 at 19:20:13 from (63.162.17.244):

In Reply to: 340 industrial power steering problem posted by suumoe on November 29, 2006 at 19:03:16:

suumoe, sounds like time for full service, all the oil in the rearparts of the tractor every thing aft of the clutch, There are three drain plugs down under, they need to be taken out and allowed to drain for atleast 12 hours if the oil is anyother than looking like new, and you need to replace the filter. The rearend and hydraulic system take the best of 15 gallons of the correct oil, IH HI TRAN, or suitable substitute, NOT RO 32 46, or68. If you do this I suspect your troubles go away HTH

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]