Re: Cub won't start after rebuild

Posted by gene (missouri) on November 26, 2006 at 20:52:27 from (64.85.217.96):

In Reply to: Cub won't start after rebuild posted by Kermit on November 26, 2006 at 09:37:43:

Tight engine. Inserts and cylinder walls getting dry.

1) Put several tablespoons full of oil on top of each piston - need to lubricate the cylinder walls.

2) Prime the oil system. Use the allen plug on the left side of the engine.

You have compression so the major problem is ignition.

3) Ignition timing is off. Check with a timing light. If engine fires at TDC you are 180 degrees out.

4) Retard the timing a bit - fire just after TDC.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]