Re: Governor Question

Posted by gene bender on November 07, 2006 at 18:30:18 from (67.55.226.214):

In Reply to: Governor Question posted by A Newbie on November 07, 2006 at 10:21:35:

Yes i rebush them with a 5/8x1x2 bronze bushing i find at LOWES. After you unbolt the housing and move it forward between the fan remove the spring loaded pin on the gov shaft as it will give you enough cleatence to remove the housing. Just did one yesterday. I fasten the housing on a fixture i made and use the milling machine with 5/8 cutter to rebore the hole. Enough of the seal remains and they dont seem to leak. You will have to trim the bushing a little for length when putting throttle shaft back. Little by little i am getting all 10 As ,BNs and Bs rebuilt sure makes nice throttle response.

Replies:

• Re: Governor Question A Newbie 19:20:01 11/07/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]