Re: 450 hard starting

Posted by D Slater on November 06, 2006 at 04:02:09 from (205.188.116.133):

In Reply to: 450 hard starting posted by Reaver on November 04, 2006 at 19:27:02:

As others posted a weak spark that could be from several things. Also 450 gas were 6 volt then changed to 12 volt by IH as production went along. If your tractor is 12 volt the starter selonoid used a extra post for a wire to run to coil side of resistor. This put full 12 volts to coil when starter is engaged. This will help if not in place but if everthing is in good shape it should start without it.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]