exhaust manifold opening size on an M farmal

Posted by ss_impalla on November 05, 2006 at 22:18:52 from (4.244.183.19):

the tapped hole in the top of the exhaust maninfold is what? 2" pipe tap ? My brother in law has an International 20/40 I think. Does it have the same exhaust opening? His manifold bolt hoses are all screwed up so I was thinking about cleaning up the threads in the manifold and screwing a piece of pipe in it to hook a muffler to. He's already let the tractor lock up on him once from water getting in. Luckily, I used some PB Blasterand let it sit a few days and got it freed up again. Does anyone know where I can get a tap that size to chase the threads with, without breaking the bank?

Replies:

• Re: exhaust manifold opening size on an M farmal Janicholson 06:09:54 11/06/06 (0)
• Re: exhaust manifold opening size on an M farmal mark geiger 03:40:29 11/06/06 (0)
• Re: exhaust manifold opening size on an M farmal Dave S. 02:12:35 11/06/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]