Re: New here: buy Cub or Model A???

Posted by Red Dave on November 04, 2006 at 16:00:45 from (66.109.234.120):

In Reply to: Re: New here: buy Cub or Model A??? posted by DennisT on November 04, 2006 at 15:45:41:

About the only differences between the Farmall A and the International (industrial) A are the front axle is square and there is a foot throtle on the industrial version.

The serial number should be on the inside of the left-hand seat bracket, stamped on an aluminum plate.

Cubs are OK, but if you want to use any PTO driven equipment, stay with the A unless you have access to Cub-specific attachments. Cub PTO's turn backward and at engine speed, not 540 RPM. And when it comes to pull-type implements, an A is about twice the tractor.

The disadvantage of an A is the lack of hydraulics. This was corrected on it's replacment, the Super A.

Replies:

• Re: Cub or Model A??? - differences... DennisT 19:05:38 11/04/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]