Re: IH 5488 Engine Question

Posted by the tractor vet on October 23, 2006 at 17:13:30 from (75.19.127.115):

In Reply to: IH 5488 Engine Question posted by Tex Aggie on October 23, 2006 at 15:36:27:

Here is the list of things to check , Drop the pan and let her drip for a couple days till all the oil is done drippen pull the valve cover and pressure up the cooling system to 15-20 lbs. and start looken . the reason i said to pull the valve cover is i have found a couple DT 414-466's that the soft plugs in the top of the head to be leaking and if they leak then it goes stright to the pan . So if it is not the sleeves and ya don't have to do a major on the engine at least roll in a set of rods and mains. Also there is a chance that and injector well is leaking .

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]