Re: haulstar 350c

Posted by El Toro on October 18, 2006 at 04:09:59 from (205.188.116.133):

In Reply to: Re: haulstar 350c posted by scotc on October 17, 2006 at 22:24:24:

We have an Allison plant about 20 miles from me.
When they closed the GM assembly plant just outside of Baltimore a lot of the workers accepted
jobs here. I had heard they were going to build
transmissions for Dodge trucks and for UPS trucks.
I think that fell through for some reason.

The 1600hp EMD engine was two cycle too. Detroit
Diesel came out with a 4 cycle engine in 1999.
I thought those Freightliners used Cummins diesel's. EMD engines were used locomotives
only they had 16 cylinders. The V8 engine that we had were used in tug boats too, but they used 2 of them. Hal
PS: The turbo charger on that engine sounded like a jet plane taking off. Our dynamometer weighed 60 tons and the M1 weighed about the same
and that engine would reach 45 mph without any effort. I have a picture of the old dynamometer
known as the M7 and it had 2 500hp Ford engines. If you want to see a picture email me.
[email protected]

Replies:

• Re: haulstar 350c scotc 16:19:09 10/19/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]