Re: 574 Clutch

Posted by richard in nz on October 15, 2006 at 22:57:41 from (222.153.103.194):

In Reply to: 574 Clutch posted by BEWILDERED on October 15, 2006 at 18:30:07:

If the fingers look bad then most likley the clutch pedal has been ridden and worn them away or the release bearing is siezed. Check the holes in the linkage are not elongated and the adjuster rod and the clevis pin are in good condition. Check also the bushes and clutch cross shaft are not worn causing lost motion in the linkage. The 574 will not have the wear plate in, they came out in 85 series production and tractors so fitted have no pedal return spring. As the clutch wears the gap between the fingers and bearing will diminish anyway.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]