Re: 444 Hydraulics

Posted by FromJB2 on October 09, 2006 at 21:01:51 from (64.4.68.230):

In Reply to: 444 Hydraulics posted by Flying 444 on October 09, 2006 at 17:18:41:

Hi Flying, the creeping up of the 3pt hitch is usually caused by the Draft Control Level (Small control lever on the fender side of the 3pt hitch control lever) not being pushed all the way forward. The draft control lever should be only user for in ground 3pt equipment like a plow.

The correct hydraulic oil level is like someone else mentioned about 4" from bottom of filler plug.

JB2

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]