Re: 1951 Cub Engine Rebuild Questions - 3

Posted by the tractor vet on September 28, 2006 at 19:59:25 from (75.24.35.203):

In Reply to: 1951 Cub Engine Rebuild Questions - 3 posted by Kurt in Va Beach on September 28, 2006 at 19:25:26:

First off get the crank turned and no there is not suppose to be a tapper in the bore and as for what is the stock bore i do not know with out going out to the truck and getting the book to see where you are at now but yes get it bored and while it is at the machine shop do the valves . Then when it comes home get the detergent out and scrub your littel heart out on the oil gallies and the bore till ya start to see it turning brown then it is clean rince and blow dry coat with oil and put her together .

Replies:

• Re: 1951 Cub Engine Rebuild Questions - 3 Kurt in Va Beach 11:28:52 09/29/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]