Farmall & IHC Tractors Discussion Board |
Re: 300U power steering leak....help please.
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by TDK on September 21, 2006 at 19:39:31 from (64.12.116.65):
In Reply to: Re: 300U power steering leak....help please. posted by brian koczur on September 20, 2006 at 04:26:17:
You'll loose a little fluid, maybe a half pint or less, as gearbox only holds a little over a quart. Since yours only has one plate you need to lay a straight edge across it to check for flatness. The single plates have a tendency to bend in the middle and my guess it that's the main problem. After straightening plate(if needed), clean the shims & all sealing surfaces with brake or carb cleaner. I use something called "Loctite 510 Flange Sealant" on the shims & sealing surfaces. It will not affect the adjustment. Bolt it back together and see if it leaks. If the clearance between rack and pad needs adjustment, send me an email and I'll try to help.
Replies:
Home
| Forums
Today's Featured Article -
Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|