Re: IH660 3 point shaft

Posted by Wardner on August 29, 2006 at 10:47:56 from (4.154.240.243):

In Reply to: IH660 3 point shaft posted by srodster on August 29, 2006 at 09:14:38:

The 660 was never fitted from the factory with a three point hitch. You have either a 560 type fast hitch and 3pth adaptor or an aftermarket 3pth. I'll bet the tin floor boards and maybe the fenders are gone.

On the fast hitch, I always thought the forged lift arms were welded to the torsion piece and not easily removeable. Same goes for the aftermarket hardware although I am sure there were many mfgs and designs back in the day. Yeah, photos would be helpful. Perhaps somebody has seen what you want in a salvage yard. Otherwise you are in for some machine work or a welded repair.

Replies:

• Re: IH660 3 point shaft srodster 10:53:03 08/29/06 (2)
  • Re: IH660 3 point shaft Nat 2 14:06:06 08/29/06 (1)
    • Re: IH660 3 point shaft srodster 06:29:50 08/30/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]