Re: Real 826 Service Manuals

Posted by K.B.-826 on August 28, 2006 at 17:13:12 from (68.115.105.80):

In Reply to: Real 826 Service Manuals posted by Jim Allen on August 28, 2006 at 08:04:18:

Jim, I mostly get by with the I&T book, but I agree with you, for the most part the only useful info it gives you is torque specs, clearances, ect. If you look around on e-bay long enough, you may find the old original IH Blue Ribbon books, but unfortunatly, you often need several of them for each model. The engine would be covered in one book, the TA in another, the PTO unit in another, and so on. Your best bet would be to go to your nearest Case-IH dealer and order a brand new service manual. Like the Vet says, for the most part info for one model will work just fine for another of the same vintage. That's OK if you've been around these machines for years. However, for example, if you don't know that a quite a few of the hydraulic pressures differ from somthing small and early like a 706 to somthing big and late like a 1456, you could end up chasing after a problem that doesen't exist.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]