Re: 706 shifter shot!

Posted by the tractor vet on August 24, 2006 at 16:51:23 from (75.24.33.63):

In Reply to: Re: 706 shifter shot! posted by Genep on August 24, 2006 at 06:04:36:

The plate on the side is where the rev. shift fork is and when you pull the top cover off the shift rod comes with the cover and the shift fork will fall over and the littel woodworf key will more then likely fall out of the shaft so those are the things that ya want to catch. It would be a real good idea to get a I T manual so you can read and look . Yes the covers do ware and i have never bought a cover yet i have then bored out and a bushing pressed i in the shifter hole and the rev. shifter done at the same time but hey i am cheap . Parts that you will need are probabley some rollers a spring a shifter shaft couple woodworf keys a roll pin maybe a couple as i call them cub cadet tierod ends for the shift linkage up on top a couple headed pins maybe a shifter cam and maybe a bushing . Since i can not look for myself to see what all you do need also a spring loaded park loc as like i said before now is the time.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]