Re: Putting sheetmetal back on .

Posted by rotax on August 23, 2006 at 10:10:29 from (67.149.143.223):

In Reply to: Putting sheetmetal back on . posted by rotax on August 23, 2006 at 06:19:19:

All the tins were blasted with plastic media as not to warp or add texture to the metal. I have loosened the tank and rad , its almost as if the holes in the tractor for the rad were bigger it would be perfect.
I have even played with differnt thicknesses of rubber under the rad to get a nice even plane on the body lines.
It's just going to take a little time .I'm sure you guys are right on the fact they were never perfect to begin with .

Thanks Jim

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]