Re: Farmall 300 charging system

Posted by Bob on August 21, 2006 at 20:11:42 from (64.21.249.40):

In Reply to: Farmall 300 charging system posted by Dan Klockziem on August 21, 2006 at 20:00:13:

The "cutout relay" inside your old voltage regulator is stuck closed, causing the discharge.

Likely, the internal "guts" are the opposite between your old and new ammeters, causing the opposite readings.

Swapping ALL the wires between the posts of the ammeter will correct it's reverse indication.

(Assuming your battery has been connected correctly all along, and the ground polarity didn't get swapped at the same time as you changed out the ammeter.)

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]