Re: touch control valve problem

Posted by Aces on August 17, 2006 at 18:26:31 from (65.54.154.48):

In Reply to: touch control valve problem posted by Charlie M on August 17, 2006 at 18:09:05:

Charlie First I would check the couplers to see that thsy are not the cause of it not working both ways. Do not interchange ball couplers with one's with points and stay with same brands, if the spring load of each coupler is not the same when you activate the valve the weak coupler can jam closed. If that does not help the valve can be truned from single to double and if not set right that can make it work as you say. As for leak down not kit for the valve, but you can put on check valve to hold implement up and it will not go down with power.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]