Re: fingers pressure plate

Posted by Gary in Mozarks on August 16, 2006 at 05:22:08 from (64.240.21.161):

In Reply to: fingers pressure plate posted by scotty-mn on August 15, 2006 at 14:09:24:

I ran into the same problem putting a new pressure plate in our 460D. The finger height was not preset. Off the top of my head, it needed to be set at 2 7/32 height. An IT manual would have the measurement. Once i made the adjustment it worked fine.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]