Re: Need help with Manuals to order

Posted by Nat 2 on August 07, 2006 at 16:31:21 from (24.93.8.168):

In Reply to: Need help with Manuals to order posted by Mike CA on August 07, 2006 at 15:10:47:

Contrary to Joe's recommendation (no offense intended Joe, just a difference of opinion), the Operator's manual is the one single solitary MUST HAVE for your tractor, especially if you're a tractor rookie. It includes many of the operation and safety procedures for this tractor, as well as lubrication guides, wiring diagrams, and other critical information. There's way more there than just telling you how to make the tractor move.

For ~$20, the I&T manual will give you a goodly amount of information on basic repairs and adjustments. The tractor isn't all that complicated, so if you're at all mechanically inclined, you can pretty much figure out how things come apart and go back together with the I&T and just by looking at the tractor.

Parts manuals are nice, but lots of paper and not really necessary. Your local Case IH dealer still has the parts manuals, and most parts can be readily identified (i.e. "I need a such-and-such for a Farmall H.").

Replies:

• Re: Need help with Manuals to order Mikey D 16:39:04 08/07/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]