Re: IH 240 Tach

Posted by Janicholson on August 03, 2006 at 08:19:32 from (199.17.6.122):

In Reply to: IH 240 Tach posted by Rob in Ore on August 02, 2006 at 18:47:50:

When the engine vibrates at specific speeds, the tach needle will move some. This indicates that the tach guts may be out of lube, or worn. If it will spin with a drill as TV indicates, it will probably work. Automotive universal spedometer cables will replace the old cable with a little patience and ingenuity. Lube the new cable with graphite based chassis grease (ford spec) to assure a longer than original life. If there is rust in the housing (outside flexible part of the cable) it must be cleaned up or replaced. Good luck, JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]